[innercityteacher]

So how does a swinger get to hit the ball better, farther, where desired more often?

http://lynnblakegolf.com/forum/showthread.php?p=72058&highlight=club+speed#post72 058






More research and range balls needed!

ICT

OK, now we have got some real work to do!

http://lynnblakegolf.com/forum/showt...ght=club+speed

Daryl's Avatar
Daryl Daryl is offline
Senior Member

Join Date: Feb 2005
Location: Illinois
Posts: 3,237
Single Wrist Action promotes Loading the #3 PP against the Primary Lever and Standard Wrist Action (Swivel) promotes Loading the #3 PP against the Secondary Lever.

For Swingers, the Start-up Swivels 1/4 Turn Rotation is a simplified approach and promotes the #3 PP Load against the Secondary Lever for any Length Stroke going past Start-up. "Pressure Point #3 must have a Feel of being rotated a quarter turn at The Top with Standard Wrist Action" does not mean that the Rotation occurred at the "Top".

The difference between "Top" and "End" is related to Wrist Action. With 10-18-C, Single Wrist Action, moving from Top to End would re-align the Right Forearm (1/4 Turn) and therefore re-locate the Right Elbow (1/4 Turn) with the result that the Secondary Lever would Load against the #3 PP. So, we can Swivel at Start-up or Swivel merely by moving the Backstroke from "Top" to "End". Note that each of the three procedures in 10-18-C stop the Backstroke at "Top".

The Important difference between Loading the #3 PP against the Primary or Secondary Lever is the "Subsequent Right Arm Participation". 7-3

So, the "Top" for a Hitter is an Alignment rather than a Location.



Quote:
10-11-0-3 PRESSURE POINT #3 (above) can be either active or passive (6-C-2-A) Accumulator #1 indirect drive (7-11) of the Secondary Lever Assembly (6-A-3) (2-K). That is, actively as Accumulator #2 Axe Handle application for Hitting (10-3-K, 10-19-A) but passively as Accumulator #3 (6-B-3-0, 10-19-C) or with a Right Arm Swing (7-19). Lag Loading (10-19) and Delivery Line (2-J-3) requirements. It is Loaded (10-22) per 7-19 as required by Component 19 application being employed (10-19). Study 2-G and 6-C.

Remember, with Swinging, Pressure Point #3 must have a Feel of being rotated a quarter turn at The Top with Standard Wrist Action (10-18-A), just and only because of Loading Action direction – no actual movement of anything. So from The Top to Release, the Loading put the top side of the Clubshaft against the first knuckle of the forefinger. But with Hitting there must be NO change whatever.

When the Wrists “Swivel” back to the Vertical Position (4-C-3) during Standard Wrist Action (10-18-A) per 6-B-3. Pressure Point #3 may – but need not – return to its “strong” position (Aft side of the Clubshaft). That is – if left in “Top-of-the-Clubshaft” position it becomes a Weak Single Action Grip (10-2-A) and the interchangeable equivalent to 10-2-C for Swingers. But both are improper for Hitters using Single Wrist Action (10-18-C).
You can't fake this stuff. One can artificially Load the #3 PP but the Alignments aren't present to determine the Motion of the Right Forearm Flying Wedge. Then there's EA. Without EA, it's like watching a girl throw a baseball (or O.B Left). Once the #3 PP is Loaded, you need EA to keep the Elbow aligned(Power Package) and guide it down the Proper Path.

__________________